Wide range of drawer slides in stock. Including slides of all variance from Linear slides to draw slide for specific applications. All of these slides are made from either zinc-plated steel or stainless steel and are designed and crafted so as to get the full potential from each slide.
Weight capacity/pair Kg - is the static load per pair of drawer slides, measured at the centre of a pair of slides, side mounted, spaced 450mm apart, and is based on use of all fixing points on the slide.
Important Note: Flat mounting of drawer slides, as opposed to the standard side mounding of slides, is not recommended as it results in a greatly reduced load capacity equal to only 25% of the stated weight capacity.
Drawer slide terms
Slide length (sl) The longest dimension of a fully closed slide, this should not exceed the depth of cabinet in which slide is installed.
Slide travel (tr) Distance a drawer slide moves from fully closed position.
(slide length + slide travel = fully extended slide length).
Full extension - This type of drawer slide can be extended 100% of slide length, this is standard for most 3 piece drawer slides. - a
3/4 extension - This type of drawer slide extends to approx. 75% of the slide length, this is standard for most 2 piece drawer slides.
Positive stop Drawer stops at extended/open position but does not lock or detent.
Positive lock Drawer is fi rmly held in extended/open position by means of a mechanical catch. Drawer is released by depressing a lever and pushing drawer inward. From the extended/open position the same slide may be disconnected by depressing the lever and pulling the drawer out.
Hold-in detent Drawer is fi rmly held in closed position, and released by pulling drawer open (also known as positive catch).
Lever disconnect From the extended/open position the slide may be disconnected by depressing lever and pulling drawer out.
Self-closing Toward end of drawer slide closing stroke, slide is drawn into the fully closed position.
Soft self-closing Toward end of drawer slide closing stroke, slide movement is slowed and then drawn into fully closed position.
When mounting we recommend a side space equal to
the slide thickness with an additional 0,2 to 0,5 mm
for optimal positioning.
Mounting with less than 0,2 mm side tolerance
can result in poor running of the drawer slide and
jamming of the slide - the same is true if tolerances
over 0,5mm are used.
Ensure cabinet/enclosure faces are square and
parallel prior to mounting of the drawer slides.
Full Extension - Drawer Slides | Weight Cap/Pair Kg | Slide Length mm | Full Extension | 3/4 Extension | Material
| Hold-in Detent | Lever Disconnect | Positive Stop | Self Closing | Soft Self Closing | Positive Lock | ||
P2000 | 200 | 254-711 | ✔ |
| ✔ | ||||||||
P2100 | 80 | 300-700 | ✔ |
| ✔ | ✔ | |||||||
P2200 | 60 | 304-711 | ✔ |
| ✔ | ✔ | ✔ | ||||||
P2300 | 45 | 250-700 | ✔ |
| ✔ | ✔ | ✔ | ||||||
P2500 | 30 | 250-550 | ✔ |
| ✔ | ✔ | ✔ | ||||||
P2600 | 60 | 300-500 | ✔ |
| ✔ | ||||||||
P2700 | 20 | 200-450 | ✔ |
| ✔ | ✔ | ✔ |
Full Extension - Lever Disconnect Drawer Slides | Weight Cap/Pair Kg | Slide Length mm | Full Extension | 3/4 Extension | Material
| Hold-in Detent | Lever Disconnect | Positive Stop | Self Closing | Soft Self Closing | Positive Lock | ||
P4050 | 30 | 250-600 | ✔ |
| ✔ | ✔ | ✔ | ✔ | |||||
P4080 | 30 | 350-700 | ✔ |
| ✔ | ✔ | ✔ | ||||||
P4100 | 45 | 300-700 | ✔ |
| ✔ | ✔ | ✔ | ✔ | |||||
P5100 | 45 | 250-700 | ✔ |
| ✔ | ✔ | ✔ | ✔ | |||||
P6000 | 30 | 250-700 | ✔ |
| ✔ | ✔ | ✔ | ||||||
P7000 | 15 | 200-600 | ✔ |
| ✔ | ||||||||
P7100 | 30 | 200-550 | ✔ |
| ✔ | ||||||||
P7200 | 45 | 300-700 | ✔ |
| ✔ |
Alexia House
Glenmore Business Park
Portfield Works
Chichester, PO19 7BJ (UK)
Telephone 0333 207 4497
or + 44 (0) 1483 266 777
Email sales@wixroyd.com
Company registration no. GB0496138
Company VAT number GB 408154022
For other bank details visit our FAQs page.